Fairy Tail Final Season - Lucy Heartfilia - Pop Up Parade - Taurus Form Ver. (Good Smile Company)
Category
Classification
Origin
Character
Version
Releases
Dimensions
H=170mm (6.63in)
Buy
Comments57
In stock @ Solaris Japan (¥4,511)
Brand New for ¥5,974
└ At our shop you are always a ★
Pre Owned for ¥4,511
└ Check product page for the item condition.
Brand New for ¥5,974
└ At our shop you are always a ★
Pre Owned for ¥4,511
└ Check product page for the item condition.
In stock @ animota (¥5,500)
We are now offering the 3rd Anniversary Campaign! All items are 5% off the listed price.
In addition, discounts of up to 15% can be applied separately for bulk purchases!
Don't miss it!
Product page : POP UP PARADE "FAIRY TAIL" Final Series Lucy Taurus Form Ver. Complete Figure
We are now offering the 3rd Anniversary Campaign! All items are 5% off the listed price.
In addition, discounts of up to 15% can be applied separately for bulk purchases!
Don't miss it!
Product page : POP UP PARADE "FAIRY TAIL" Final Series Lucy Taurus Form Ver. Complete Figure
In stock @ Ninoma (MFC Partner) (¥5,963)
Product page : ninoma.com/sear...
Official new item , shipped worldwide from Japan
About 56 USD | 51 EUR | 74 CAD
Product page : ninoma.com/sear...
Official new item , shipped worldwide from Japan
About 56 USD | 51 EUR | 74 CAD
Selling her for 15 plus shipping just pm for detail shipping from USA
blyntoys.com/pr...
⭐️IN STOCK BRAND NEW⭐️
Price: $49.99 USD + FREE US Shipping
✅FREE domestic US shipping on all orders! (3-5 days)
✅Earn 1% cash back with every purchase!
✅Authentic merchandise guaranteed!
⭐️IN STOCK BRAND NEW⭐️
Price: $49.99 USD + FREE US Shipping
✅FREE domestic US shipping on all orders! (3-5 days)
✅Earn 1% cash back with every purchase!
✅Authentic merchandise guaranteed!
In stock @ Lunar Toy Store ($38.99)
Now Available and Ready to Ship
$5 Flat Rate Shipping in Continental U.S.
Lucy Heartfilia: Taurus Form Ver. POP UP PARADE
Now Available and Ready to Ship
$5 Flat Rate Shipping in Continental U.S.
Lucy Heartfilia: Taurus Form Ver. POP UP PARADE
The shape or size of the pegs/holes could be a little off. If the pegs seem too big, maybe shave them down a bit and try inserting again.
Could also be that the legs are not properly aligned for the holes. If this seems the case, you can try warming a leg and then bending it slightly to better position over the holes.
If it doesn't seem like a problem you can solve, you can contact GS support at [email protected]
Hi! After writing that I had contacted them and they replied quickly with they're sorry but they're not offering replacements for now. I also asked about this on the forums, but as usual it went unnoticed there. I'm not sure how to go about filing, because a previous attempt with another figure didn't end up well (maybe I did it wrong, I don't know what kind of filing is used for figures), so I didn't want to do that. I thought the problem is with the holes (?) rather than the pegs, since it kept pushing the pegs back, so I decided to focus on that. I used the hairdryer on the base as long as I could, forced the pegs in, kept pressing and hold the figure under cold water. For now, this seems to have worked, but it was FRUSTRATING. I really hate it when things are this badly quality checked. >.< Anyway, I hope this holds for a long time. Thank you for taking the time and replying!
Could also be that the legs are not properly aligned for the holes. If this seems the case, you can try warming a leg and then bending it slightly to better position over the holes.
If it doesn't seem like a problem you can solve, you can contact GS support at [email protected]
Hi! After writing that I had contacted them and they replied quickly with they're sorry but they're not offering replacements for now. I also asked about this on the forums, but as usual it went unnoticed there. I'm not sure how to go about filing, because a previous attempt with another figure didn't end up well (maybe I did it wrong, I don't know what kind of filing is used for figures), so I didn't want to do that. I thought the problem is with the holes (?) rather than the pegs, since it kept pushing the pegs back, so I decided to focus on that. I used the hairdryer on the base as long as I could, forced the pegs in, kept pressing and hold the figure under cold water. For now, this seems to have worked, but it was FRUSTRATING. I really hate it when things are this badly quality checked. >.< Anyway, I hope this holds for a long time. Thank you for taking the time and replying!
Second, when the pegs go in, they jump back!! The foot on the rock takes a few seconds, but the one on the back immediately jumps back. Is there a solution to this? This is so frustrating. I never had this problem even with cheap prize figures ffs...
The shape or size of the pegs/holes could be a little off. If the pegs seem too big, maybe shave them down a bit and try inserting again.
Could also be that the legs are not properly aligned for the holes. If this seems the case, you can try warming a leg and then bending it slightly to better position over the holes.
If it doesn't seem like a problem you can solve, you can contact GS support at [email protected]
The shape or size of the pegs/holes could be a little off. If the pegs seem too big, maybe shave them down a bit and try inserting again.
Could also be that the legs are not properly aligned for the holes. If this seems the case, you can try warming a leg and then bending it slightly to better position over the holes.
If it doesn't seem like a problem you can solve, you can contact GS support at [email protected]
This is by far the most problematic PUP that I have.
I love the design, let's put that aside.
First, there's such a long disclaimer under the transparent base that I thought it was a huge scratch from above! It's because the line gets blurred above since the base is transparent, it looks like a long scratch. Did no one notice this during production? None of the other PUPs have such a long line of words.
Second, when the pegs go in, they jump back!! The foot on the rock takes a few seconds, but the one on the back immediately jumps back. Is there a solution to this? This is so frustrating. I never had this problem even with cheap prize figures ffs...
Just when I thought I want to give these another chance, something like this happens...
Is there a GSC support that I can reach out to? I never had to deal with something like this before? (I didn't shop from GSC, I shopped from HLJ)
I love the design, let's put that aside.
First, there's such a long disclaimer under the transparent base that I thought it was a huge scratch from above! It's because the line gets blurred above since the base is transparent, it looks like a long scratch. Did no one notice this during production? None of the other PUPs have such a long line of words.
Second, when the pegs go in, they jump back!! The foot on the rock takes a few seconds, but the one on the back immediately jumps back. Is there a solution to this? This is so frustrating. I never had this problem even with cheap prize figures ffs...
Just when I thought I want to give these another chance, something like this happens...
Is there a GSC support that I can reach out to? I never had to deal with something like this before? (I didn't shop from GSC, I shopped from HLJ)
Brand New! => POP UP PARADE Fairy Tail Final Season - Lucy Heartfilia Taurus Form Ver. [Good Smile Company]
~39.63 € / ~$42.88
└ +5% Points on all Orders!
└ Worldwide Express Shipping! ✈