Vocaloid - Hatsune Miku - Trick or Miku (Union Creative International Ltd)
Category
Origin
Character
Version
Releases
Dimensions
H=170mm (6.63in)
Buy
Information
Order via Union Creative will come with a bonus acrylic keyholder (72x95mm) illustrated by Hidari PICTURE #1751072.
Comments722
Aftermarket be kind to this one. She's amazing and more people deserve her in their lives.
korilakkuma ♡ irl catgirl
AmiAmi shipped out my replacement! I’m really hoping she doesn’t come with a broken pigtail again…
Her pigtail came broken /(ㄒoㄒ)/~~ but I had enough issues getting her so I just superglued it
Looking to buy this figure, Europe only!
In stock @ Ninoma (MFC Partner) (¥19,374)
Product page : www.ninoma.com/...
Official new item , shipped worldwide from Japan
About 181 USD | 164 EUR | 240 CAD
Product page : www.ninoma.com/...
Official new item , shipped worldwide from Japan
About 181 USD | 164 EUR | 240 CAD
Here's the problem I have with this figure: at first I can't really use it because the support rod doesn't really touch the cape. Then I realize because my other support rod doesn't fully stick into the base. The reason is because there's "nub mark" on my other support rod, which prevents it from fully sticking into the base.
It raise my overall figure a bit, so I couldn't use it. Once I got my 2 support rods fully stick into base (by cutting the nub mark on my other support rod), I can use the third support rod ( now it actually supports the cape). You may or may not have this problem.
EDIT: postimg.cc/gall... Here's where you put the third support rod (about). Too lazy to upload it to myfigurecollection (don't want to resize image >_>).
Oooh I get it. Sorry, from your initial answer; it wasn't clear to me that you had a problem as well; naturally I thought you were talking about mine when you mentioned not sticking the rods. :)
Did you try using the hairdryer a little bit on the base? About 4-5 seconds, not more. It makes these types of rods stick in without any issues. Worked with mine and many other figures. It's frustrating that we have to do this, but it works. :)
It raise my overall figure a bit, so I couldn't use it. Once I got my 2 support rods fully stick into base (by cutting the nub mark on my other support rod), I can use the third support rod ( now it actually supports the cape). You may or may not have this problem.
EDIT: postimg.cc/gall... Here's where you put the third support rod (about). Too lazy to upload it to myfigurecollection (don't want to resize image >_>).
Oooh I get it. Sorry, from your initial answer; it wasn't clear to me that you had a problem as well; naturally I thought you were talking about mine when you mentioned not sticking the rods. :)
Did you try using the hairdryer a little bit on the base? About 4-5 seconds, not more. It makes these types of rods stick in without any issues. Worked with mine and many other figures. It's frustrating that we have to do this, but it works. :)
Interesting. I really didn't see any use of it in the photos and there weren't any instructions inside; so the only comments I found made me think it looked like an extra piece. The two other rods that need to be placed on the base sticks well enough with mine, though. So I didn't understand the "you can't really use it if your other support rod doesn't fully stick" part? (Although I never said that either) Am I missing something? Do I use this or no need now?
Here's the problem I have with this figure: at first I can't really use it because the support rod doesn't really touch the cape. Then I realize because my other support rod doesn't fully stick into the base. The reason is because there's "nub mark" on my other support rod, which prevents it from fully sticking into the base.
It raise my overall figure a bit, so I couldn't use it. Once I got my 2 support rods fully stick into base (by cutting the nub mark on my other support rod), I can use the third support rod ( now it actually supports the cape). You may or may not have this problem.
EDIT: postimg.cc/gall... Here's where you put the third support rod (about). Too lazy to upload it to myfigurecollection (don't want to resize image >_>).
Here's the problem I have with this figure: at first I can't really use it because the support rod doesn't really touch the cape. Then I realize because my other support rod doesn't fully stick into the base. The reason is because there's "nub mark" on my other support rod, which prevents it from fully sticking into the base.
It raise my overall figure a bit, so I couldn't use it. Once I got my 2 support rods fully stick into base (by cutting the nub mark on my other support rod), I can use the third support rod ( now it actually supports the cape). You may or may not have this problem.
EDIT: postimg.cc/gall... Here's where you put the third support rod (about). Too lazy to upload it to myfigurecollection (don't want to resize image >_>).
Pictures302
Related Items
Community
Owned by
Ordered by
Wished by
Sold by
Hunted by
Reviewed by
Mentioned in
Listed in
Average rating
9.28/10 rated 150 times
Top 100
Tags42
Related Clubs18
Changelog 12
Added by
Coffee 5 years ago
Last edited by
pommedeterre 1 month ago
© Crypton Future Media / Union Creative International Ltd / Chiaki / Hidari / Murakawa Shoushin
Brand New! => Piapro Characters: Vocaloid - Hatsune Miku - TRICK OR MIKU Ver. REISSUE [Union Creative]
-10% OFF / ~127.84 € / ~$136.41
└ +5% Points on all Orders!
└ Worldwide Express Shipping! ✈